Aceup Technology Co. Ltd./Dian Deng/典登科技
  

HOMEABOUT USSERVICECASE STUDYCONTACT USCHINESE VERSION


Rechargeable hair dryer (hair dryer) high discharge lithium battery charging stand(Circuit Design)
 
Specifications:

  • 3 Cell (3 Charge & Sinlgle Release)
  • DC voltage input: 15V
  • DC current input: 1A
  • Battery Type: Lithium
  • Battery Voltage: 12.6V
  • Battery capacity: 3A
  • Charging current: 600mA
  • Charging time: 4 ~ 5 hours
Li-ion battery charger algorithm & features:

    * When the detected battery voltage exceeds 1.1V, that the battery in, charging begins; lower than 1.1V, that the battery is not loaded, not to charge movement.
    * If the battery voltage is below 3.7V, places to 150mA trickle charge when the battery voltage greater than 3.7V then enter the fast charge mode.
    * If the battery voltage is above 3.7V, 600mA~800mA current fast charging places.
    * When the lithium battery voltage reaches 4.17V, the change to constant voltage charging, the charge current gradually decreases, when the charging current less than 10mA, charging is complete.
    * If the battery still full of fast charge 2 hours, then stop charging.
    * If the battery voltage greater than 4.17V, said rechargeable battery is fully charged before needing to recharge, the charger stops charging
Rechargeable hair dryer (hair dryer) high discharge lithium battery charging stand-典登科技Rechargeable hair dryer (hair dryer) high discharge lithium battery charging stand-典登科技


Aceup Technology Co. Ltd./Dian Deng/典登科技Dian-Deng/ACEUP TECHNOLOGY CO., LTD/R.O.C. Registeration NO:  53330825
Aceup Technology Co. Ltd./Dian Deng/典登科技Contact Address: 5F., No.611, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.)
Aceup Technology Co. Ltd./Dian Deng/典登科技TEL:+886-2-2627-4767Aceup Technology Co. Ltd./Dian Deng/典登科技E-MAIL: service@dian-deng.com
PROFESSIONAL DEVELOPMENT OF ELECTRONIC CIRCUITS LAYOUT DESIGN - PROFESSIONAL SOFTWARE FIRMWARE DEVELOPMENT - PROFESSIONAL SOFTWARE LOGICAL LAYOUT - PROFESSIONAL SINGLE CHIP / MCU / MICROPROCESSOR DEVELOPMENT - PROFESSIONAL PROOFING DESIGN - PROFESSIONAL-VOLUME PRODUCT DEVELOPMENT - PRODUCTION ADVICE AND ASSISTANCE TEST THE SYSTEM WITH THE PRODUCTION - LIFE APPLICATION ELECTRONIC - VOLTAGE / CURRENT / CHARGE / DISCHARGE INTEGRATION OF THE LAYOUT - DESIGN COSTS REASONABLE - CONSULTATION SEEKING LONG-TERM PARTNERS - TO REDUCE DEVELOPMENT COSTS